Web-Series for South-Central Region

Web-Series for South-Central Region

Event Dates

Monday, October 18 | Tuesday, October 19

Available Credits

8 AIA HSW/LU CE Hour(s)
2 GBCI General Hour

JOIN US EACH AFTERNOON • FREE TO ATTEND! • ATTENDANCE REPORTED ON A PER-PRESENTATION BASIS
SOUTH-CENTRAL REGION INLCUDES THE FOLLOWING STATES: ALABAMA, ARKANSAS, KANSAS, LOUISIANA, MISSISSIPPI, MISSOURI, AND, OKLAHOMA

Founded in 1954 by Emmanuel Mullet, Wayne Dalton was built on a dedication to ingenuity and customer service. As our business grew, so did our commitment to expanding our product lines, leading the company to become one of the largest door manufacturers in the United States. Since the beginning, we’ve remained committed to being the garage door partner whose innovation drives dealer productivity and provides industry-leading garage door solutions. In an effort to continue this innovation, Wa...

Event Agenda

Monday, October 18, 2021

Monday, October 18, 2021 | 10:00 am Central

Thru-The-Wall HVAC Specifications for Multi-Unit Applications
1 AIA HSW/LU CE Hour(s)

Efficient HVAC design is paramount for multi-family building projects as it impacts efficient air delivery, unit serviceability and occupant comfort. Join us in this one-hour course as we discuss how thru-the-wall HVAC systems can provide an optimal solution in multi-unit project applications.

Learning Objectives:
  1. Compare and contrast multi-unit HVAC system options in terms of installation, serviceability, and architectural flexibility
  2. Identify the environmental and economical benefits of thru-the-wall systems, including reduced material waste, labor, installation time, and long-term maintenance
  3. Discuss important factors to consider when specifying a thru-the-wall HVAC system to ensure proper equipment sizing, energy efficiency, and performance
  4. Apply best practices when installing thru-the-wall HVAC systems, including placement, clearances, and water drainage, for optimized energy efficiency and occupant comfort
National Comfort Products

Monday, October 18, 2021 | 11:00 am Central

Concrete Tile Roofing: The World's Most Sustainable and Energy Efficient Roof System
Sponsored By Eagle Roofing
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

In this one hour course, we will take an in-depth look at the sustainability and energy efficient attirbutes of concrete tile roofing, including the near zero-waste manufacturing process, life-cycle cost and performance versus temporary asphalt shingle roofing as well as the installation process which enhances the inherent thermal mas

Learning Objectives:
  1. Discuss how the versatility of concrete tile roofing combined with its durability makes it one of the most sustainable roofing products available
  2. Consider the value of products composed of a small number of raw materials that are sustainable, including some recycled materials
  3. Review the near zero waste manufacturing process of concrete roof tiles from the introduction of raw materials to the finished product
  4. Compare and contrast an installation method that exploits the air permeable characteristics of concrete tile roofs versus other temporary roofing materials
  5. Identify key performance characteristics of concrete tile roofing including wind and hail resistance
  6. Analyze the longevity, durability, and overall life cycle cost analysis of concrete roof tile compared to asphalt shingles, wood shakes, slate and metal
  7. Confidently specify concrete tile roofing as an alternative to slate, metal , wood shakes and temporary asphalt shingles
Eagle Roofing

Monday, October 18, 2021 | 1:00 pm Central

Sponsored By Scranton Products
Presented By Tim James
1 AIA HSW/LU CE Hour(s)

Many current issues and trends are changing the way we design commercial restrooms. Join us in this one-hour course as we discuss what users want in a restroom experience, how to address increased demand for privacy, and which materials work best in different applications.

Learning Objectives:
  1. Discuss public restroom evolution and how current trends are changing the way we design restrooms
  2. Explain the increasing demand for higher privacy and how specific partitions and accessories can be utilized to promote privacy and personal well-being
  3. Compare and contrast the various partition materials and styles available, focusing on which ones help create a safe and hygienic restroom environment for users
  4. Discuss the production process of HDPE partitions and how this contributes to a more sustainable, healthier indoor environment

Monday, October 18, 2021 | 2:00 pm Central

High Performance Door Solutions for Food & Beverage Manufacturing
1 AIA HSW/LU CE Hour(s)
1 RCEP PDH(s) for Engineers

In food and beverage applications, conditioned air control and productivity are critical. Join us in this one-hour course as we discuss high performance door solutions that address the unique needs of food and beverage manufacturing, processing, storage, and distribution facilities from dock to freezer and everything in between.

Learning Objectives:
  1. Explain how high performance doors can promote safety, efficiency, and productivity in food and beverage manufacturing
  2. Illustrate key zones in a food and beverage manufacturing facility that benefit from high performance doors and evaluate different freezer, cooler, and warehouse solutions
  3. Recognize unique environmental, safety, and electrical conditions that impact the performance of high performance door systems and identify regulations and standards that address these issues
  4. Discuss how to effectively specify high performance doors in food and beverage applications through case studies
Overhead Door Corporation
Tuesday, October 19, 2021

Tuesday, October 19, 2021 | 10:00 am Central

Retrofit Anchoring of Masonry and Stone Facades
Sponsored By PROSOCO
Presented By Kelly Morris
1 AIA HSW/LU CE Hour(s)

An overview of existing masonry and stone façade instability issues, the cause and recognition of these problems, and the cost-effective re-anchoring solutions for repair involving various masonry wall construction techniques.

Learning Objectives:
  1. Recognize the function and characteristics of brick ties and anchors
  2. Recognize existing masonry veneer instability conditions and their associated cause.
  3. Review the types of retrofit anchoring options and how they function
  4. Summarize the typical retrofit anchoring and masonry restoration process

Tuesday, October 19, 2021 | 11:00 am Central

Sponsored By Homasote
Presented By Paul Volkoff
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

In this one-hour course, design professionals will gain practical knowledge of sound control and the many health and safety benefits it has for architects, builders, and occupants. It will discuss building code criteria and guidelines, including strategies to meet these requirement through various methods.

Learning Objectives:
  1. Discuss how sound control can help reduce noise pollution, sleep disturbances, litigation costs and privacy issues for building occupants and owners
  2. Review building code criteria and guidelines including the International Building Code (IBC) and International Residential Code (IRC) to address sound control issues that affect building occupants
  3. Describe sound control strategies to alleviate noise-induced sound damage by utilizing mass, decoupling, absorption, acoustical sealant, and other design methods
  4. Examine sound control design methods for walls and floors using sustainable, mold-resistant fiberboards made from recycled materials

Tuesday, October 19, 2021 | 1:00 pm Central

It's All Downhill...The Evolution of Slope-to-Drain Shower Pans
Sponsored By Noble Company
Presented By Dean Moilanen
1 AIA HSW/LU CE Hour(s)
1 IDCEC HSW CEU(s)

Slope-to-drain waterproofing concepts are an essential part of ceramic tile and stone installations. Over time, a variety of installation methods and products have been employed to achieve the required slope to drain. Failure to follow industry best practices can result in costly failures in wet-area applications.

Learning Objectives:
  1. We will examine the evolution of slope-to-drain shower pan methods.
  2. We will examine the pros and cons of historic slope-to-drain shower pan methods.
  3. We will investigate the latest developments in slope-to-drain technology.
  4. We will examine current best practice for successful slope-to-drain installations.
Noble Company

Tuesday, October 19, 2021 | 2:00 pm Central

Firestopping Key Points
Presented By John Zalepka
1 AIA HSW/LU CE Hour(s)

In this one-hour seminar, the basics of life safety and code compliant design for firestopping installation are covered. Additionally, this course covers major issues in design such as the coordination of different trades responsible for firestopping.

Learning Objectives:
  1. Identifying the main type of firestop systems.
  2. Understanding of the UL System approach to managing firestop compliance.
  3. Understanding the basics of life safety design, such as when, where and why to firestop.
  4. Understanding codes and the steps necessary to design code compliant firestop solutions.
  5. Identify firestop systems by trade.
Specified Technologies Inc.

This Event Is Intended for the Following Regions:

Click a region to view state CE requirements