Boca Raton, FL - Thursday July 21, 2022

Boca Raton, FL

Event Date
Thursday July 21, 2022

7:30 am - 5:30 pm

Available Credits

Up to 8 AIA HSW/LU CE Hour(s)
Up to 3 RCEP PDH(s) for Engineers
Up to 3 GBCI General Hour
Maggiano's Little Italy
21090 St. Andrews Blvd
Boca Raton, FL 33433
no registration link
Registration Price

$65.00

Terms
Early Bird Discount! $30.00 off if purchased before Jul 7, 2022

JOIN US IN YOUR CITY • REGISTER BELOW • ATTENDANCE REPORTED ON A PER-PRESENTATION BASIS

Founded in 1954 by Emmanuel Mullet, Wayne Dalton was built on a dedication to ingenuity and customer service. As our business grew, so did our commitment to expanding our product lines, leading the company to become one of the largest door manufacturers in the United States. Since the beginning, we’ve remained committed to being the garage door partner whose innovation drives dealer productivity and provides industry-leading garage door solutions. In an effort to continue this innovation, Wa...

Event Agenda

Thursday, July 21, 2022

7:30 am

8:00 am

Managing Condensation, Water Intrusion, and Energy in the Real World
Sponsored By PROSOCO
Presented By Alley Mathson
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

Window-opening air and water leakage has been a difficult problem for the construction industry. This course evaluates building failures, conventional construction approaches, and new developments in waterproofing techniques to show a path forward for designers seeking higher-performing wall assemblies.

Learning Objectives:
  1. Explain why job-site conditions should be used as systems engineering requirements in construction product development.
  2. Compare and contrast the similarities and differ-ences between silicone, urethane, and STPE sealants.
  3. Describe the multi-step weatherproofing process of conventional window installation and how such installations fare in real-world testing conditions.
  4. Explain new window weatherproofing techniques using liquid flashing membranes.
  5. Instruct others on construction defect remediation using STPE technology through case-study examples.

9:10 am

Designing Functional Outdoor Living Space
Sponsored By Wolf Home Products
Presented By Jason Foura
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

Overview of the outdoor living space and materials used in outdoor living design. Material selection, care and design, will be discussed, and common misconceptions will be addressed.

Learning Objectives:
  1. Understand the evolution of the outdoor living market.
  2. Address trends and materials used in outdoor living spaces.
  3. Apply standard design principles and how they relate to outdoor living spaces.
  4. Identify and explain common misconceptions and safety issues in designing outdoor living spaces.
  5. Explain proper use and care of outdoor living spaces and how to avoid them for extended performance.
Wolf Home Products

10:20 am

The Perfect Pair: Sustainable HDPE + Copper Restroom Touch-Points
Sponsored By Scranton Products
Presented By Taylor Wilhelm
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

When designing a restroom, professionals are often faced with the challenge of selecting materials that are durable, hygienic, and sustainable.

Learning Objectives:
  1. Recognize the threat of infectious bacteria on high-touch surfaces in restrooms, focusing on the harm that infected partitions and handles can have on occupants’ health
  2. Describe the safe and sustainable characteristics of HDPE and explain how it promotes a healthier environment for building occupants
  3. Illustrate the efficacy of copper at inhibiting infectious bacteria and compare it to other materials that claim antimicrobial properties
  4. Evaluate the sustainable practices of manufacturers in order to specify quality HDPE + Copper products that are safe for both the environment and occupants

11:30 am

Commercial Door Operators: A UL 325 Safety Standard Review
Sponsored By Chamberlain Group
Presented By Corinne Furfine
1 AIA HSW/LU CE Hour(s)

Facilities that require commercial doors and operators depend on the smooth functioning of these systems for productivity, profitability, security, and safety. This course addresses the various types of commercial doors and operators available.

Learning Objectives:
  1. Compare the functions of various stiles of commercial doors.
  2. Describe the types of commercial door operators.
  3. Discuss the features of reduction systems and solenoid brakes, as well as the NEMA ratings for enclosures.
  4. Explain the requirements of UL 325 and how it contributes to the safe operation of commercial doors.
  5. List the devices that meet the UL standard and describe their features.

12:30 pm

1:00 pm

High Performance Door Solutions for Food & Beverage Manufacturing
Presented By Mark Scharff
1 AIA HSW/LU CE Hour(s)
1 RCEP PDH(s) for Engineers

In food and beverage applications, conditioned air control and productivity are critical. Join us in this one-hour course as we discuss high performance door solutions that address the unique needs of food and beverage manufacturing, processing, storage, and distribution facilities from dock to freezer and everything in between.

Learning Objectives:
  1. Explain how high performance doors can promote safety, efficiency, and productivity in food and beverage manufacturing
  2. Illustrate key zones in a food and beverage manufacturing facility that benefit from high performance doors and evaluate different freezer, cooler, and warehouse solutions
  3. Recognize unique environmental, safety, and electrical conditions that impact the performance of high performance door systems and identify regulations and standards that address these issues
  4. Discuss how to effectively specify high performance doors in food and beverage applications through case studies
Overhead Door Corporation

2:10 pm

Gate Operators: UL 325 and ASTM F2200 Standards Safety Review
Sponsored By Chamberlain Group
Presented By Corinne Furfine
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

Define the UL 325 and ASTM F2200 Standards and their importance, list the different types of gates available and the types of gate operators that are used to maneuver them.

Learning Objectives:
  1. Identify the types of gate operators that are used to maneuver the various gates that are available
  2. Explain how to identify entrapment zone's, and how to place entrapment protection devices to meet the standards, as well as explain the difference between monitored and non-monitored entrapment protection devices
  3. Define the requirements of the UL 325 and ASTM F2200 standards as they apply to gate and gate operator installations
  4. Define the type's of gates that are available in today's market place

3:20 pm

Maintaining Temperature & Humidity in Critical Zones
Presented By Maria Acosta
1 AIA HSW/LU CE Hour(s)
1 RCEP PDH(s) for Engineers

The battle to maintain temperature and humidity within critical zones has given HVAC engineers headaches for years—but not anymore!

Learning Objectives:
  1. Recall the three main zone variables—temperature, humidity, and particulates—and discuss their impact on a building’s indoor air quality and occupant health
  2. Explain how implementing a reheat design improves upon the standard heating and cooling scenario to provide optimal humidity levels
  3. Define neutral air and discuss its role in providing ideal zone conditions with optimal temperature and humidity levels
  4. Illustrate how to incorporate emerging technologies into new and existing projects in order to control temperature and humidity
Rheem Commercial HVAC

4:30 pm

Security Pass-Thru Combinations - Update
Presented By Wade Arnold
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

The course teaches about bullet resistant and secure pass thru windows and equipment to keep employees safe in hospitals, banks, pharmacies and all public domains. The course will instruct upon the varying levels of bullet resistant protection, anti-theft, various window tints, shades and security levels.

Learning Objectives:
  1. Define & clarify the types of bullet resistant protection levels
  2. Evaluate & recognize where and when to specify security windows and pass thru devices
  3. Specify correct products to support the design criteria
  4. Distinguish the differences of fire-rated applications along with added security measures and how they overlap
Specialty Fenestration Group
no registration link
COVID-19 Protocols

Just like you, we are excited for the opportunity to resume live events. That being said, the health and safety of our attendees and presenters is our prime concern so, in addition to specific venue infection prevention procedures, we are doing the following:

  • Requiring that any presenter or attendee with any COVID-19 symptoms not attend the event (full refunds given, no matter how late the notice)
  • Working with venues to allow for social distancing while seated at the event
  • Providing hand sanitizer at the entrance to the presentation space
  • Following best practices for food distribution at the event
  • Monitoring and following local guidelines/mandates for infection prevention

State CE Requirements

Florida CE Requirements

Florida Board of Architecture and Interior Design
(850) 487-1395
Renewal Cycle: 
Biennial
Total Hours Required: 
24
Detailed Hours Required: 
22 HSW, 2 Florida building code
Renewal Deadline: 
December 31st even years