San Antonio, TX - Thursday December 5, 2024

San Antonio, TX

Event Date
Thursday December 5, 2024

7:30 am - 5:30 pm

Available Credits

Up to 8 AIA HSW/LU CE Hour(s)
Up to 1 GBCI General Hour
Up to 1 IDCEC HSW CEU(s)
Up to 1 ADA Accessibility / Barrier-Free Req.
Maggiano's Little Italy
17603 I-10
San Antonio, TX 78257
Registration Price

$100.00

Terms
Early Bird Discount! $30.00 off if purchased before Nov 21, 2024

JOIN US IN YOUR CITY • REGISTER BELOW • ATTENDANCE REPORTED ON A PER-PRESENTATION BASIS

Event Agenda

Thursday, December 5, 2024

7:30 am

Breakfast & Networking

8:00 am

Wood-Plastic Composite Cladding Sustainable Rainscreen Wall System

Wood-Plastic Composite Cladding Sustainable Rainscreen Wall System

Sponsored By Fiberon Composite Cladding
Presented By Brandon Greer
1 AIA HSW/LU CE Hour(s)

Rain is one of the most important things to control in wall construction for both a building’s structural integrity and the occupants’ health. Join us in this one-hour course as we discuss the aesthetic, performance, and sustainable attributes of wood-plastic composites (WPCs) for use in rainscreen applications.

Learning Objectives:
  1. Identify potential moisture management issues that can cause harm to both a building’s aesthetic and structural integrity as well as occupants’ health and safety.
  2. List four basic components of rainscreen wall systems that help minimize rainwater passage into the wall and effectively dissipates any water remaining back to the exterior.
  3. Compare and contrast the suitability of various cladding materials to serve in rainscreen systems, particularly their durability, sustainability, and safety.
  4. Evaluate wood-plastic composite (WPC) cladding options for use in rainscreen applications, including recyclability, strength, and life-cycle cost attributes.
Fiberon Composite Cladding

9:10 am

Crafting Culinary Spaces: Exploring Kitchen Cabinet Construction, Finishes, and Uses

Crafting Culinary Spaces: Exploring Kitchen Cabinet Construction, Finishes, and Uses

Sponsored By Wolf Home Products
Presented By Jason Foura
1 AIA HSW/LU CE Hour(s)

A study of the US cabinet market and cabinet construction methods including substrates, composition, hardware, and finishes.

Learning Objectives:
  1. Understand the categories that go in to making up the domestic kitchen cabinet market. Knock down cabinets flat stacked and shipped from overseas and how they are competing against domestic cabinet makers with higher labor costs against countries with no labor laws.
  2. Identify and compare various substrates and composition of kitchen cabinets. How furniture board and MDF are made with binders and materials that can off gas.
  3. Examine the features and benefits of various finish options for kitchen cabinets. How these finishes are applied regarding robotics for paint and stain booths as well as capturing and recycling fumes/off gas. Discussion on off gassing of compounds in Resins such as thermofoil and melamine cabinet finishes.
  4. Define and compare framed and frameless cabinets, as well as factory built versus assembled cabinets. These differences play a significant role in how they are installed as well as the sturdiness and safety of hanging heavier weights/cabinet materials.
  5. Discuss available and new hardware options as well as best installation practices for safe and sturdy install.
Wolf Home Products

10:20 am

Protecting People and Property: Fortifying Building Safety with Ballistic, Blast, Storm Impact & Forced Entry Solutions

Protecting People and Property: Fortifying Building Safety with Ballistic, Blast, Storm Im...

Sponsored By Specialty Fenestration Group
Presented By Wade Arnold
1 AIA HSW/LU CE Hour(s)

As the number and volatility of threats to facility security and safety continue to escalate, protection is becoming paramount in the scope of today’s facility design.

Learning Objectives:
  1. Identify security threats which dictate design standards and product performance criteria
  2. Compare and contrast design options to fortify buildings with security, safety, and aesthetics in mind
  3. Define the different levels of ballistic, blast, and forced entry testing standards
  4. Properly specify ballistic, blast, forced entry and storm impact fenestration solutions
Specialty Fenestration Group

11:30 am

Commercial Restroom Design to Promote Safety, Sustainability and Savings

Commercial Restroom Design to Promote Safety, Sustainability and Savings

Sponsored By Excel Dryer, Inc.
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour
1 IDCEC HSW CEU(s)

This course is designed to help you consider what it takes to design restrooms that are sustainable and safe, without breaking the bank.

Learning Objectives:
  1. Articulate the role that commercial restrooms play in supporting occupant health and well-being
  2. Identify key safety considerations within commercial restrooms, to protect building occupants
  3. Describe sustainability considerations within commercial restrooms, including those that promote occupant well-being
  4. Recognize opportunities for cost savings when designing commercial restrooms

12:30 pm

Lunch & Networking

1:00 pm

Resisting Attack: Building Ballistic and Blast & Forced Entry Protection

Resisting Attack: Building Ballistic and Blast & Forced Entry Protection

Sponsored By Armortex
Presented By Rick Snelling
1 AIA HSW/LU CE Hour(s)

In this one-hour course, design professionals will learn about blast and ballistic resistant technology developed to provide comprehensive life, asset and building protection.

Learning Objectives:
  1. Evaluate the variety of innovative resistance technologies that are used to protect occupants and assets from threats including blast and ballistic assault
  2. Explore the standards organizations that create the criteria and testing for resistance technologies to determine the successfulness of these products protecting life and securing a building in the event of blast or ballistic attack
  3. Analyze panels, windows, doors & related physical security products engineered to provide durability and safety against threats to life, buildings and assets
  4. Apply knowledge of anti-ballistic technology through case studies that highlight products that protect and provide comprehensive security

2:10 pm

Lawns and Beyond

Lawns and Beyond

Sponsored By ForeverLawn
1 AIA HSW/LU CE Hour(s)

The enhanced need for water conservation and a decrease of harmful runoff resulting from lawn maintenance has pushed the demand for environmentally friendly alternatives for landscaping and recreational areas.

Learning Objectives:
  1. Recall the benefits of synthetic grass
  2. List the applications of synthetic grass
  3. Describe the construction of a standard synthetic grass system
  4. State the installation considerations to facilitate a long service life
ForeverLawn

3:20 pm

High-Performance Fire-Rated Joint Assemblies

High-Performance Fire-Rated Joint Assemblies

Sponsored By CEMCO
Presented By David Mistler
1 AIA HSW/LU CE Hour(s)

In this one-hour course, design professionals will gain knowledge of head-of-wall, bottom-of-wall and wall-to-wall assemblies, as well as the respective UL standards for approval, It will discuss different joint treatment types and the components involved with each application.

Learning Objectives:
  1. Identify a variety of wall-to-wall, bottom-of-wall, and head-of-wall joints, including their UL assemblies and ratings
  2. Evaluate different joint treatment types for their advantages and disadvantages, particularly in regard to their durability, cost, and safety
  3. Discuss International Building Code that relates to fire resistant joint systems and firestopping that protects occupants in the event of a fire
  4. Apply knowledge of IBC standards to specify, install, and operate fire resistance joints to ensure occupant safety
CEMCO

4:30 pm

Course TBA

State CE Requirements

Texas CE Requirements

Texas Board of Architectural Examiners
(512) 305-9000
Renewal Cycle: 
Annual
Total Hours Required: 
12 Hours
Renewal Deadline: 
December 31st
Board Guidelines
12 HSW (1 hour SD or energy efficient design + 1 hour barrier-free design + min. 8 hours structured + max. 4 hours self-directed)