Bellevue, WA - Thursday June 9, 2022

Cancelled

Bellevue, WA

Event Date
Thursday June 9, 2022

7:30 am - 5:30 pm

Available Credits

Up to 8 AIA HSW/LU CE Hour(s)
Up to 4 GBCI General Hour
Up to 1 RCEP PDH(s) for Engineers
Maggiano's Little Italy
10455 NE 8th St.
Bellevue, WA 98004
no registration link
Registration Price

$65.00

Terms
Early Bird Discount! $30.00 off if purchased before May 26, 2022

JOIN US IN YOUR CITY • REGISTER BELOW • ATTENDANCE REPORTED ON A PER-PRESENTATION BASIS

This Event is Partnered with Wayne-Dalton Commercial Doors

Founded in 1954 by Emmanuel Mullet, Wayne Dalton was built on a dedication to ingenuity and customer service. As our business grew, so did our commitment to expanding our product lines, leading the company to become one of the largest door manufacturers in the United States. Since the beginning, we’ve remained committed to being the garage door partner whose innovation drives dealer productivity and provides industry-leading garage door solutions. In an effort to continue this innovation, Wa...

Event Agenda

Thursday, June 9, 2022

7:30 am

Breakfast & Networking

8:00 am

Improving the Performance of Finished Concrete Flooring

Improving the Performance of Finished Concrete Flooring

Sponsored By PROSOCO
Presented By Nick Savage
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

This overview of concrete floor basics shows participants how to get the most from finished concrete floors. Along the way, it discusses levels of finished concrete flooring not commonly known. The program shows how to protect and maintain finished concrete flooring.

Learning Objectives:
  1. Compare the waste generation characteristics of lithium-silicate hardener/densifiers to older potassium and sodium-silicate hardeners/densifiers.
  2. Estimate the expected service life of a finished concrete floor and rate it for sustainability on a scale of "good-fair-poor."
  3. List two ways finished concrete floors "perform" that contribute to sustainability.
  4. Explain how regular maintenance contributes to sustainability of polished concrete floors.

9:10 am

Sound Control in Construction

Sponsored By Homasote
Presented By Paul Volkoff
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

In this one-hour course, design professionals will gain practical knowledge of sound control and the many health and safety benefits it has for architects, builders, and occupants. It will discuss building code criteria and guidelines, including strategies to meet these requirement through various methods.

Learning Objectives:
  1. Discuss how sound control can help reduce noise pollution, sleep disturbances, litigation costs and privacy issues for building occupants and owners
  2. Review building code criteria and guidelines including the International Building Code (IBC) and International Residential Code (IRC) to address sound control issues that affect building occupants
  3. Describe sound control strategies to alleviate noise-induced sound damage by utilizing mass, decoupling, absorption, acoustical sealant, and other design methods
  4. Examine sound control design methods for walls and floors using sustainable, mold-resistant fiberboards made from recycled materials

10:20 am

Insulated Roof Decks

Insulated Roof Decks

Sponsored By All Weather Insulated Panels
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

A discussion on the increasing adoption of insulated roof decks in the North American, including descriptions on what insulated metal roof decks entail, comparisons of insulated metal roof decks with more traditional systems, and design considerations for insulated metal roof decks.

Learning Objectives:
  1. Understand the concept of Insulated Roof Deck Technology and why they have been developed.
  2. Articulate the benefits of Insulated Roof Decks when compared to more traditional materials used in commercial low slope roofing.
  3. Outline the diaphragm sheer and non-diaphragm options for Insulated Roof Decks.
  4. Realize the proper design & application strategies for Insulated Roof Decks.
All Weather Insulated Panels

11:30 am

Gate Operators: UL 325 and ASTM F2200 Standards Safety Review

Gate Operators: UL 325 and ASTM F2200 Standards Safety Review

Sponsored By Chamberlain Group
Presented By Brandon Greer
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

Define the UL 325 and ASTM F2200 Standards and their importance, list the different types of gates available and the types of gate operators that are used to maneuver them.

Learning Objectives:
  1. Identify the types of gate operators that are used to maneuver the various gates that are available
  2. Explain how to identify entrapment zone's, and how to place entrapment protection devices to meet the standards, as well as explain the difference between monitored and non-monitored entrapment protection devices
  3. Define the requirements of the UL 325 and ASTM F2200 standards as they apply to gate and gate operator installations
  4. Define the type's of gates that are available in today's market place

12:30 pm

Lunch & Networking

1:00 pm

Concrete Tile Roofing: The World's Most Sustainable and Energy Efficient Roof System - Update

Concrete Tile Roofing: The World's Most Sustainable and Energy Efficient Roof System...

Sponsored By Eagle Roofing
1 AIA HSW/LU CE Hour(s)
1 GBCI General Hour

In this one hour course, we will take an in-depth look at the sustainability and energy efficient attributes of concrete tile roofing, including the near zero-waste manufacturing process, life-cycle cost and performance versus temporary asphalt shingle roofing as well as the installation process which enhances the inherent thermal mass

Learning Objectives:
  1. Discuss how the versatility of concrete tile roofing combined with its durability makes it one of the most sustainable roofing products available
  2. Consider the value of products composed of a small number of raw materials that are sustainable, including some recycled materials
  3. Review the near zero waste manufacturing process of concrete roof tiles from the introduction of raw materials to the finished product
  4. Compare and contrast an installation method that exploits the air permeable characteristics of concrete tile roofs versus temporary roofing materials
  5. Identify key performance characteristics of concrete tile roofing including wind and hail resistance
  6. Analyze the longevity, durability, and overall life cycle cost analysis of concrete roof tile compared to asphalt shingles, wood shakes, slate, and metal
  7. Confidently specify concrete tile roofing as an alternative to slate, metal, wood shakes, and temporary asphalt shingles
Eagle Roofing

2:10 pm

High Performance Door Solutions for Food & Beverage Manufacturing

High Performance Door Solutions for Food & Beverage Manufacturing

Sponsored By Overhead Door Corporation
1 AIA HSW/LU CE Hour(s)
1 RCEP PDH(s) for Engineers

In food and beverage applications, conditioned air control and productivity are critical. Join us in this one-hour course as we discuss high performance door solutions that address the unique needs of food and beverage manufacturing, processing, storage, and distribution facilities from dock to freezer and everything in between.

Learning Objectives:
  1. Explain how high performance doors can promote safety, efficiency, and productivity in food and beverage manufacturing
  2. Illustrate key zones in a food and beverage manufacturing facility that benefit from high performance doors and evaluate different freezer, cooler, and warehouse solutions
  3. Recognize unique environmental, safety, and electrical conditions that impact the performance of high performance door systems and identify regulations and standards that address these issues
  4. Discuss how to effectively specify high performance doors in food and beverage applications through case studies
Overhead Door Corporation

3:20 pm

Privacy Partitions in Today's Commercial Restrooms

Sponsored By Scranton Products
Presented By John McKeon
1 AIA HSW/LU CE Hour(s)

In this program, we explore the current trends and issues changing the way we design restrooms. We’ll discuss what users want in a restroom experience, demand for increased privacy, and solutions for making your restroom the best room.

Learning Objectives:
  1. Discuss public restroom evolution and how current trends are changing the way we design restrooms
  2. Explain the increasing demand for higher privacy and how specific partitions and accessories can be utilized to promote privacy and personal well-being
  3. Compare and contrast the various partition materials and styles available, focusing on which ones help create a safe and hygienic restroom environment for users
  4. Discuss the production process of HDPE partitions and how this contributes to a more sustainable, healthier indoor environment

4:30 pm

Security Pass-Thru Combinations

Security Pass-Thru Combinations

Sponsored By Specialty Fenestration Group
Presented By Wade Arnold
1 AIA HSW/LU CE Hour(s)

The course teaches about bullet resistant and secure pass thru windows and equipment to keep employees safe in hospitals, banks, pharmacies and all public domains. The course will instruct upon the varying levels of bullet resistant protection, anti-theft, various window tints, shades and security levels.

Learning Objectives:
  1. Define & clarify the types of bullet resistant protection levels.
  2. Evaluate & recognize where and when to specify security windows and pass thru devices.
  3. Specify correct products to support the design criteria.
  4. Distinguish the differences of fire-rated applications along with added security measures and how they overlap.
Specialty Fenestration Group
no registration link

State CE Requirements

Washington CE Requirements

Washington State Board for Architects
(360) 664-1388
Renewal Cycle: 
Biennial
Total Hours Required: 
24
Detailed Hours Required: 
16 HSW
Renewal Deadline: 
Licensee’s birthday
Board Guidelines